SPECIFICATIONS

Brand Name: SZWDSE

Recommend Age: 14+y

Origin: Mainland China

Material: Metal

Material: plastic

Material: PVC

Model Number: S471

Design: Cars

Controller Mode: MODE2

Wheelbase: 185mm

Certification: CE

CE: Certificate

Certificate Number: As Show

Tire Track: 172mm

Dimensions: 32*20.5*14 CM

Remote Distance: 120m

Type: Car

Package Includes: batteries

Package Includes: Operating Instructions

Package Includes: Remote Controller

Package Includes: USB CABLE

Remote Control: Yes

Scale: 1:16

State of Assembly: Ready-to-Go

Features: REMOTE CONTROL

Power: 70KM/H

Charging Voltage: 7.4V 1500mAH

Warning: NONE

Warranty: NONE

Control Channels: 4 channels

Steering servo: Three-wire 17G digital servo

Flight Time: 15-18 minutes (continuous full speed running)

Charging time: 3-3.5 hours

Remote control size: 13*7.5*21 CM

Body weight: 1250g

Remote control weight: 170g

Light configuration: LED headlight, LED roof headlight, LED roof rear light

Differential: planetary gear differential (metal)

Frequency: 2.4GHZ

Motor: 2847 brushless motor (4000 KV)

Wheel diameter: 82mm

NOTE :

1. This is not an ordinary toy remote control car, because the remote control car is too fast, it is recommended to use remote control car in open areas to avoid bumping into obstacles.

2. The retail package is made of foam boxes, which can reduce the damage to the product during transportation. Original boxes are not included.

3.This remote control car is only suitable for high-speed driving. Because the generator will make a strange noise when driving at low speed, this is a normal phenomenon not a fault.

4. The shell of the remote control car is covered with a film protection, if the shell has scratches then you can tear off the film.

Please note when using the battery：

After receiving the product, please remove the battery and charge it, and then use it after charging.

1. When the battery is dead, it must be charged in time to ensure that the battery has surplus power. If the battery is completely empty, the battery will not be able to charge

2. When charging the battery, disconnect the connection from the remote control car. Be sure to take the battery out to charge it separately

3. If you do not use the remote control car, please disconnect the battery from the wire of the remote control car, absolutely do not connect, and fully charge the battery, otherwise it will damage the battery

We recommend： that you watch the video and read our description carefully before you buy

Ltem Name：SCY-16106PRO

Size：32*20.5*14 CM

Maximum speed：70KM/H

Battery：7.4V 1500mAh

Driving motor：2847 Brushless motor (4000 KV)

Working time：15-18Mins

Remote control battery: 3*1.5V AA battery (not included)

Features:

1. The use of simulation structure design, with real car control feeling, to achieve full scale stepless speed, high-speed driving, rapid acceleration, deceleration, braking, reversing, left turn, right turn.

2. Applicable sites: flat, sand, mud, grass.

3. 4WD drive: front and rear upright spring damping, double-wishbone independent suspension system.

4.2.4G full proportional synchronized remote control system. Full proportional throttle/steering.

5. Metal differential, metal differential cup, powder planetary gear, powder active gear, powder main gear, metal front steering knuckle + metal rear axle seat.

6. Metal CVD front drive shaft, metal rear dogbone, metal wheel cups.

7. 3-wire 17G digital servo.

8.7.4V, 18650-1500mAh Li-ion battery (T plug), discharge rate 15C.

9. New remote control panel function: rudder volume adjustment.

10. The whole car with 16 ball bearings.

11. Metal second floor plate, metal front and rear arm code, metal mid-drive shaft.

12. Shell using high toughness explosion-proof PVC shell + high-strength anti-roll skeleton.

13. Shell equipped with LED headlights, LED roof headlights, LED roof rear lights; (three modes: constant light, slow flash, fast flash).

14. Equipped with a head-up wheel.

15. Simulation of bigfoot tires, strong grip.

Q&A

Q1: Why are the tires of the remote control car exposed?

A: [Special design] The toe grip is strong and not easy to drift, which helps to improve the stability of the body and the grip of the tire when cornering.

Q2: How to adjust the tire inclination of the remote control car?

A: It can be adjusted by the fine adjustment and throttle fine adjustment buttons of the remote control.

Q3: What should I do if I can't find my accessories?

A: Please check the package carefully first; If you don't find it, please help us with the full unboxing video and we will check this issue with our warehouse and provide a corresponding solution.

Q4: Q: What should I do if I have any after-sales problems?

A: Please rest assured, if there is any problem, we are always at your service, in order to solve your problem more effectively, for professional help.They will respond to your questions within 24 hours.

Q5: What should I do when my remote control cannot be connected to RC?

A: Please make sure the battery is fully charged. Then manually pair the toy car and the remote control, you can also refer to the user manual for details on matching the toy car. You can test the voltage of the motherboard so that you can analyze what the problem is.

Q6: What should I do when the toy car can turn and cannot move forward or backward after my remote control is connected to RC?

A: Please first determine whether the battery is fully charged, and then test the motherboard and motor voltage, so that you can analyze what the problem is.